Eplas Sports Bottle EGS-700PP/BL 700ml

Eplas Sports Bottle EGS-700PP/BL 700ml
RM 13.93


Product Description


Temperature resistance -10 ºC - 100ºC, Odor less, Non-microwave, With shaker ball

Product Information

Third Party Logos

Food Safe, Green Dot

Preparation and Storage

Preparation and Usage

Wash the bottle before use.
Way to Open and Close
1. Open the lid.
2. Twist on the lid to seal and close.
3. Keep the bottle upright and twist on the lid.
Do not drink while water is above 70ºC

Clean Instruction
Keep the bottle dry after use.
Body-1. Clean the bottle in warm water with diluted neutral detergent. Use a piece of soft cloth to clean the dirt on the bottle.
2. Do not scrub with hard objects for stubborn dirt. Clean with a soft brush.
Lid- The lid is not detachable. Open the lid, flush clean in water, then dry and close the lid.

Bottle Maintenance
Check each part closely to confirm if any part is deformed or broken.
Examine follow this chart:
Problem: Bottle, Lid smells
Check points: Liquid in the bottle has been kept too long? Any stain on body, lid or Stopper?
Solution: Clean each part timely

Problem: Lid leaking
Check points: Check if the seal ring fits well to the lid
Solution: Fit the seal ring to lid, twist on the lid to body tightly.

Problem: Lid leaking
Check points: Any foreign object on seal ring?
Solution: Remove the foreign object.

Name and Address

Manufacturers Address

Ee Jia Housewares (M) Sdn. Bhd. (510535-U),
Plot 243a (Lot Lama 7064),
Jalan Perindustrian Bkt. Minyak 3,
Bukit Minyak Industrial Park,
14100 Seberang Perai Tengah,

Return To

Ee Jia Housewares (M) Sdn. Bhd. (510535-U),
Plot 243a (Lot Lama 7064),
Jalan Perindustrian Bkt. Minyak 3,
Bukit Minyak Industrial Park,
14100 Seberang Perai Tengah,
Tel: 604-502 3488, 604-508 8477
Fax: 604-502 3499
Email: sales@ee-jia.com

Safety Information

1. Do not microwave.
2. Do not clean in dishwasher or dry in drier.
3. Do not clean with thinner, petrol, abrasive power or scouring powder.
4. Do not put in soak in a steam sterilizer or soak in hot water to avoid print from falling.

This item is intended for water / beverage only. Do not over fill. See below illustration for recommended filled volume (close the lid to avoid spill)

3cm from water line to bottle mouth
Do not put the bottle / lid in microwave or dryer to avoid deforming, leakage or broken.
Make sure the lid, flip top or shield is closed. (Leakage may happen if not closed correctly)
Do not scrub the print with hard objects.
Do not disassemble any part.

1. Close the lid while water is in the bottle.
2. Take out the bottle from bag if it leaks. Check if each part is correctly assembled.
3. Empty the bottle after use and dry it with a soft cloth.

Keep the bottle upright in a bag to avoid leaking or spilling.
Keep the bottle out the reach of small children.
Do not put the bottle close to heat source like fire, heater, etc. (Bottle may deform or discolour.)

Using Product Information

While every care has been taken to ensure product information is correct, food products are constantly being reformulated, so ingredients, nutrition content, dietary and allergens may change. You should always read the product label and not rely solely on the information provided on the website.

If you have any queries, or you'd like advice on any Tesco brand products, please contact Tesco Customer Services, or the product manufacturer if not a Tesco brand product.

Although product information is regularly updated, Tesco is unable to accept liability for any incorrect information. This does not affect your statutory rights.

This information is supplied for personal use only, and may not be reproduced in any way without the prior consent of Tesco Stores Limited nor without due acknowledgement.

Tesco © Copyright 2020


Products you add to your trolley will appear here